Field Remedy: 1542
| Subject: | Engine - Car cannot be started |
| Models: | Engines: | Option: |
|---|
| Vectra-C 2002...2003 | Z22SE | AT AF23 |
| Complaint: | Car cannot be started after deletion of CIM failure codes. DTC U2106 is stored in the Engine Control Module. Exhaust emission control lamp activated. |
|---|
| Cause: | Softwarefailure in Engine Control Module. |
| Production: | |
Remedy:
If the engine does not start after the deletion of failure codes and the exhaust emission control lamp is still activated proceed as follows:
- Turn ignition off. - Wait for appr. 10 sec. - Connect Tech 2. - Select engine Z 22 SE. - Clear DTC’s.
| FunctionalGroup: | J - Engine |
|---|
| Complaint Group: | 06 - Failure Code Setting by Control Unit,13 - No/Poor Function |
| Trouble Code: | U2106 |
