Replace Fuel Temperature Sensor Opel Vectra C

Remove

1. 1. Remove fuel injection system control unit
2. 2. Remove fuel injection system control unit retaining plate (1) • Unclip vacuum line to brake servo • Unscrew 4x bolt (2)

3. 3. Remove fuel temperature sensor (1) • Disconnect wiring harness connector.

Install

4. 4. Clean thread.
5. 5. Install fuel temperature sensor • Connect wiring harness plug • Tighten fuel temperature sensor 23 Nm

Note. Insert with sealing compound (red)

6. 6. Install fuel injection system control unit retaining plate • Tighten 4x bolt
7. 7. Install control unit, fuel injection system