Replace Switchover Valve Solenoid Valve Opel Vectra C

Remove

1. 1. Open bonnet
2. 2. Disconnect battery. • Remove nut
3. 3. Raise vehicle by its entire height
4. 4. Remove solenoid valve switchover valve (2) • Detach 2x vacuum hoses (3) • Disconnect wiring harness plug (1) • Unclip switchover valve solenoid valve from intake manifold

Note. Release catch

Install

5. 5. Install solenoid valve switchover valve • Clip switchover valve solenoid valve to intake manifold • Attach 2x vacuum hoses • Connect wiring harness plug

Note. Lock catch

6. 6. Lower vehicle by its entire height
7. 7. Connect battery. • Tighten nuts
8. 8. Program volatile memories
9. 9. Close bonnet