Home/Opel/Frontera/Opel Frontera A (1992-1998)/Repair manual/Engine Electrics/Starter, Check(removed and Disassembled)
Contents Section: Engine Electrics All sections

Starter, Check(removed and Disassembled) Opel Frontera A

Engine Electrics ~148 words

Starter Check (Removed and Disassembled)

Shown here is the check for both Bosch and Delco - Remy starters.

.D. ICON05.tif0,750,75tiff;; Clean

Rotor windings - cleaning petrol (normal commercial) - only short contact permissible.

.D. ICON06.tif0,750,75tiff;; Inspect

Rotor winding - short - circuited turn with appropriate gauge.

Short - circuited turn - replace rotor.
.P. C5827.tif97,5tiff;;
.D. ICON06.tif0,750,75tiff;; Inspect

Rotor winding - for short - circuit to ground.

Hold probes to armature core and corresponding collector lamination, test lamp must not illuminate.

Short - circuit to ground - replace rotor.
.P. C5828.tif97,5tiff;;
.D. ICON06.tif0,750,75tiff;; Inspect

Rotor winding - for interruptions.

Set windings in circuit with ammeter, scan collector from lamination to lamination quickly.

Test voltage, 2 V.

Voltage variations indicate interruptions.

Interrupt - replace rotor.
.P. C5829.tif97,5tiff;;
.D. ICON06.tif0,750,75tiff;; Inspect

Field winding.

Replace burned or charred windings.

Field winding - for short - circuit to ground.

Hold probes to leading - out wires and stator, test lamp must not illuminate.

Short - circuit to ground - replace field winding.
.P. C5830.tif97,5tiff;;
.D. ICON06.tif0,750,75tiff;; Inspect

Positive brush holder - for short - circuit to ground.

Hold probes on negative brush holder and positive brush holder, test lamp must not illuminate.

Short - circuit to ground of brush holder - replace brush holder plate.
.P. C5831.tif97,5tiff;;