Immobiliser System- Modification F7:PROGRAMMING TABLE
PROGRAM TP- KEY
| Conditions for Checking | Nominal Value |
Affected terminals: -
Possible trouble codes: -
Important:
If a transponder key is lost, in the interests of safety reprogram the remaining transponder keys together with the new transponder key
Ignition OFF
Press key F7 in the system main menu, select the desired test using the arrow keys and confirm with YES. Follow the instructions in the diagnostic tester display.
Hold the transponder key to be programmed to the immobiliser receiver for approx. 1 s. It is a need to programme the number of keys selected previously. Otherwise the immobiliser will not leave the learn mode and the engine will not start.
If the display on the right appears after programming, the transponder keys have been successfully programmed.
| TRANSPONDER KEY |
PROGRAMMING
COMPLETED!
If the display on the right appears, the immobiliser control unit has to be programmed, before programming of the transponder keys can proceed.
| TRANSPONDER KEY |
PROGRAMMING
| FAILED! |