Immobiliser Frontera F0:DATA LIST
Test Instructions
· Be sure that during measurements all other current consumers are switched off (including the interior lights).
· Take measurements between the terminals stated in the troubleshooting with the relevant adapter cables from the Electronic Kit I KM - 609.
· When connecting the adapter cables do not use force.
· When checking, the specified sequence of test steps must be followed exactly.
· If at any step the desired nominal value is not reached for a test step, the fault must be eliminated before the next test step is undertaken.
· When using the multimeter, note that the correct range specified in the test steps must always be set before connection of the measuring leads.
· The nominal values given in the troubleshooting are only valid if the Multimeter MKM - 587 - A is used.
Important:
The wiring harness plug of the instrument panel should be connected when measurements are conducted. Also the instruments should be connected before measurement.