Bearing Bushes, Replace
Starter removed and disassembled.
| .D. ICON11.tif | 0,75 | 0,75 | tiff;; Important! |
Soak bearing bushings before installation at least 1/2 hour in oil.
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
|---|---|---|---|
| Press bushing out of drive bearing - use suitable drift. | |||
| .P. C5835.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
| Press bushing (1) flush into drive bearing - use KM - 266 - A. | |||
| .P. D7394.tif | 9 | 7,5 | tiff;; |
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Bushing from collector bearing.
| Press off with suitable drift - place pipe piece (1) underneath. | |||
|---|---|---|---|
| .P. D7395.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
| Press in bushing - use KM - 266 - A. | |||
| .P. D7396.tif | 9 | 7,5 | tiff;; |