Glow Plug, Check
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Glow plug - remove contact rail.
| .D. ICON07.tif | 0,75 | 0,75 | tiff;; Measure |
Glow plug for continuity - use ohmmeter.
| Replace glow plug if resistance is incorrect - approx. 0.9 ohms. | |||
|---|---|---|---|
| .P. U3454.tif | 9 | 7,5 | tiff;; |
| .D. ICON06.tif | 0,75 | 0,75 | tiff;; Inspect |
Glow plug for correct operation - connect glow plug briefly to battery; one cable to plug casing and a second to connection thread.
| .D. ICON11.tif | 0,75 | 0,75 | tiff;; Important! |
Glow test may only be carried out for short period of time (until glow range is recognized) to avoid damaging glow plug.
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Glow plug.
| .D. ICON09.tif | 0,75 | 0,75 | tiff;; Tighten (Torque) |
|---|---|---|---|
| Glow plug - 23 Nm / 17 lbf ft. |