Multec- S X 14 XE / X 16 XE(L) F2:TROUBLE CODES
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when... |
|---|---|---|---|
| 92 | HALL SENSOR CIRCUIT | see section 5.3 no.01 | · Ignition ON |
· Engine running
· Engine speed signal recognised by control unit
· Following trouble code not stored: 19
· The control unit has not recognised a pulse from the camshaft sensor at Ter. A5
· Above conditions must be fulfilled for at least 16 crankshaft revolutions
or
· Ignition ON
· Engine running
· Engine speed signal is not recognised by control unit
· Following trouble code stored: 19
· The control unit cannot evaluate the reference signal from the camshaft sensor
| · Above conditions must be fulfilled for at least 20 crankshaft revolutions |