Multec- S X 14 XE / X 16 XE(L) F2:TROUBLE CODES
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when... |
|---|---|---|---|
| 66 | BROKEN THROTTLE POSITION SENSOR HOSE | · Engine running |
· Following trouble codes not stored: 21, 22, 33, 34
· The control unit recognises an intake manifold pressure which cannot occur under the current engine load conditions.
These values are dependent on the engine speed and the throttle valve position.
· Above conditions must be fulfilled for at least 2 s
Effects:
Throttle valve opening less than 10 %:
· Oxygen sensor regulation is switched off, i.e. open oxygen sensor loop
· Engine speed higher than 1400 rpm:
All 4 injectors are switched off
· Engine speed lower than 1400 rpm:
Only 2 injectors are used
Throttle valve opening greater than 10%:
| · None |