Multec-S X 14 XE / X 16 XE (L)5 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 34 | MAP SENSOR VOLTAGE LOW | 06 | · Engine speed higher than 1050 rpm |
· Following trouble code not stored: 21
· Throttle valve aperture greater than 18.8 %
· Intake manifold absolute pressure lower than 14 kPa (140 mbar)
· Above conditions must be fulfilled for at least 0.06 s.
or
· Engine speed lower than 1050 rpm
· Following trouble code not stored: 21
· Intake manifold absolute pressure lower than 14 kPa (140 mbar)
· Above conditions must be fulfilled for at least 0.06 s.
Replacement value:
· Engine not running: Intake manifold pressure equals 90 kPa
· Engine running: The control unit calculates the intake manifold pressure depending on the engine speed and throttle valve position
Effects:
· The secondary air injection system is switched off
| · The mixture adaptation long term correction is switched off |