Multec-S X 14 XE / X 16 XE (L)5 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 21 | THROTTLE POSIT. SENSOR VOLTAGE HIGH | 05 | · Engine running |
· Engine speed lower than 3000 rpm
· Intake manifold absolute pressure lower than 85 kPa (850 mbar)
· Throttle valve potentiometer voltage higher than 3.9 V
· Following trouble codes not stored: 33, 34
· Above conditions must be fulfilled for at least 2 s
Replacement value:
· The control unit calculates with a replacement value which is dependent on the engine speed
Effects:
| · The lean mixture for starting function is switched off |