Multec- S X 14 XE / X 16 XE (L) F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 02 | DIAG. REQUEST | Ignition ON | INACTIVE 12V | - | B9 |
| Notes on Trouble-shooting: | Nominal Value: | Cause of fault: |
(If nominal value is not attained)
· Ignition ON
· Using multimeter, measure voltage:
from: X13 diagnostic plug Ter. B
to: ground
| higher than 11 volts |
|---|
| · Short circuit to ground or circuit interruption: |
from: X13 diagnostic plug Ter. B
to: K57 wiring harness plug for engine control unit Ter. B9
· K57 engine control unit defective
| · Check according to table 1. |