Multec-S X 14 XE / X 16 XE (L)5 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 24 | NO VEHICLE SPEED SIGNAL | 46, 47 | · Engine running in engine speed range 1200 to 5000 rpm |
· Engine throttle valve CLOSED (accelerator pedal in idle position)
· Intake manifold absolute pressure lower than 23.6 kPa (236 mbar)
· Following trouble codes not stored: 21, 22, 33, 34.
· Selector lever in "R", "D", "3", "2", "1" (AT only)
· Vehicle speed lower than 6 km/h (4 mph) (TECH 1 display)
· Above conditions must be fulfilled for at least 6 s.
Effects:
· Idle speed control is switched off
| · The deceleration fuel cutoff function is switched off |