Multec- S X 14 XE / X 16 XE(L) F2:TROUBLE CODES
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when... |
|---|---|---|---|
| 33 | MAP SENSOR VOLTAGE HIGH | 06 | · Engine running |
· Throttle valve opening less than 19 %
· Full load enrichment not activated
· Following trouble codes not stored: 21, 22
· Intake manifold absolute pressure higher than 98.5 kPa
· Above conditions must be fulfilled for at least 2.5 s
Replacement value:
· Engine not running: Intake manifold pressure equals 90 kPa
· Engine running: The control unit calculates the intake manifold pressure depending on the engine speed and the throttle valve position
Effects:
· The secondary air injection is switched off
| · The long- term correction of the mixture adaptation is switched off |