Multec- S X 14 XE / X 16 XE (L) F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 36 | DES. IDLE ADJUST | Vehicles with MT: |
Ignition ON
Engine running at idle speed, operating temperature
Nominal idle speed has not been changed (basic setting after control unit reset)
| - | - |
|---|---|
| X 14 XE / X 16 XE: | 900 rpm |
| X 16 XEL: | 850 rpm |
| Nominal idle speed has been programmed: |
Note:
The nominal engine speed is a programmable value.
If F0:DATA LIST no.: 37 is ACTIVE, the nominal engine speed has been reprogrammed.
| If F0:DATA LIST no.: 37 is INACTIVE, the nominal engine speed has not been altered or the control unit has been reset. In this case, ignore the TECH 1 display. A randomly selected value will be displayed. | The nominal engine speed set in F6:Miscellaneous Tests, F0:Adjustments must appear in the display | |
|---|---|---|
| Notes on Trouble-shooting: | Nominal Value: | Cause of fault: |
(If nominal value is not attained)
Not at start of production MY '95
· Select TECH 1 menu:
F6:MISC. TESTS,
F0:ADJUSTMENTS
· Program new idle speed 950 rpm
· TECH 1 data list no. 37
IDLE ADJUST
· TECH 1 data list no. 36
DES. IDLE ADJUST
| ACTIVE |
950 rpm
| · Check control unit calibration, see field remedy measures |
· Select TECH 1 menu:
F6:MISC. TESTS,
F1:ECU RESET
· TECH 1 data list no. 37
IDLE ADJUST
· TECH 1 data list no. 36
DES. IDLE ADJUST
X 14 XE / X 16 XE:
| X 16 XEL: | INACTIVE |
850 rpm
| 900 rpm | · Check control unit calibration, see field remedy measures |