Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/DOHC Diesel Engine/Replace Ribbed V-Belt Tensioner

Contents

Wiring diagrams Section: DOHC Diesel Engine

All sections

Replace Ribbed V-Belt Tensioner Opel Vectra C

DOHC Diesel Engine 1 illustration

Remove

1. Remove ribbed V-belt

Important. Note TOP/OBEN identification Damper may only be stored in upright position. Incorrectly stored dampers may be bled by repeated compression in installation position.

2. Remove ribbed V-belt tensioner • Unscrew 2x bolt (arrows)

Note. Note dissimilar bolt lengths

Replace Ribbed V-Belt Tensioner

Install

3. Install ribbed V-belt tensioner • Tighten 2x bolt 25 Nm

Note. Note dissimilar bolt lengths

4. Install ribbed V-belt