Table 7, F7:PROGRAMMING
| No. | Tech 1 Display | Conditions for checking | Nominal value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 03 | IMMOBILISER | Ignition "ON" |
Press key F7 in the system main menu, use the arrow keys to select the desired test and confirm with YES. Follow the instructions in the TECH 1 display.
Note:
While running this test, the imo - signal can be programmed. This is necessary, if a new engine control unit is installed, or if a new immobiliser control unit is installed. In this case the engine control unit has to learn the imo - signal from the immobiliser control unit.
| 143, 144, 145 | 9 | ||
|---|---|---|---|
| If the display on the right appears after programming is completed, there is still an imo - signal programmed. | |||
| If the display on the right appears after programming is completed, the immobiliser control unit is not programmed. Before programming the engine control unit it is necessary to program the immobiliser control unit. | IMMOBILISER |
ALREADY PROGRAM.
REPROGRAM?
PROGRAM
| IMMOBILISER ECU! |