Table 5, F5:ACTUATOR TEST
Note: Before carrying out F5:ACTUATOR TEST, trouble code 31 must be cleared.
| Test | TECH 1 | Notes | Nominal Values | Possible |
|---|---|---|---|---|
| Step | Display | Trouble | ||
| No. | Codes | |||
| 01 | IDLE AIR CONTROL | A defect in the idle speed adjuster affects | ||
| TEST FAILED! | the idle speed control, see also | - | - | |
| test step 17, F0:DATA LIST |
Trouble-shooting: Nominal Value: Cause of Fault:
(If nominal value is not attained)
· Remove plug from 11.5 V to 13.5 V · Lead interruptions from
idle speed adjuster - Control unit Ter. 4 to idle speed adjuster
- Control unit Ter. 37 to idle speed adjuster
Connect multimeter to
both terminals · Short circuit to ground in cable from control unit
Ter. 4 to idle speed adjuster
Ignition ON
· Measure inner resistance 8 to 10 W · Idle speed adjuster defective
of idle speed adjuster with multimeter
If nominal values are attained · Idle speed adjuster mechanically defective
(jams)