Table 2, Trouble Codes
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0: DATA LIST |
|---|---|---|
| No. | Trouble Code Storage when... | |
| 13 | 02 SENSOR | |
| OPEN CIRCUIT | 35, 36, 39, 40, 41 | · Oxygen sensor voltage lies in the range 381 mV to 591 mV (circuit interruption, oxygen sensor defective) |
· Above condition must be fulfilled for at least 2.6 s
Release conditions to store trouble code:
The trouble code is stored and the replacement value is called up if the following conditions are fulfilled consecutively:
1.) Coolant temperature higher than 70 °C (158 °F);
2.) Condition 1.) fulfilled for 3 min;
3.) Load signal greater than 3.5 ms;
4.) After conditions 1.) to 3.) are fulfilled, waiting period of 5.1 s elapsed;
5.) Trouble codes 73 and 74 not recognised
Replacement value:
The control unit takes 550 mV as replacement value.
| Oxygen sensor regulation is switched off. |