How to Remove and Install the Dis Ignition Module Opel Frontera A

Fuel Injection Systems

DIS Ignition Module, Remove and Install

Switch off ignition.

.D. ICON01.tif	0,75	0,75	tiff;; Remove, Disconnect
Ignition cable cover (1) from cylinder head cover.
.P. U8145.tif	9	7,5	tiff;;
.D. ICON01.tif	0,75	0,75	tiff;; Remove, Disconnect
Harness connector (1) and ignition cables (2) from DIS ignition module.
.P. E5405.tif	9	7,5	tiff;;
.D. ICON01.tif	0,75	0,75	tiff;; Remove, Disconnect

DIS ignition module from DIS ignition module adapter - 4 bolts (1).

Note installation position of DIS ignition module.

Remove DIS ignition module upwards.

.D. ICON02.tif	0,75	0,75	tiff;; Install, Connect
DIS ignition module to DIS ignition module adapter.
.P. E5406.tif	9	7,5	tiff;;
.D. ICON09.tif	0,75	0,75	tiff;; Tighten (Torque)

DIS ignition module to adaptor bolts - 8 Nm / 6 lbf ft.

.D. ICON11.tif	0,75	0,75	tiff;; Important!
Note firing sequence - cylinder numbers are on ignition cables and on DIS ignition module (arrows).
.P. E3686.tif	9	7,5	tiff;;
.D. ICON02.tif	0,75	0,75	tiff;; Install, Connect
Ignition cables (2) and wiring harness plug (1) to DIS ignition module.
.P. E5405.tif	9	7,5	tiff;;
.D. ICON02.tif	0,75	0,75	tiff;; Install, Connect

Ignition cable cover (1) to cylinder head cover.

.D. ICON09.tif	0,75	0,75	tiff;; Tighten (Torque)
Ignition cable cover to cylinder head cover - 3 Nm / 2 lbf ft.
.P. U8145.tif	9	7,5	tiff;;

More articles — Engine and Engine Aggregates