Home/Opel/Combo/Opel Combo C (2002-2011)/Repair manual/DOHC Diesel Engine/Replacing Oil Pressure Switch

Contents

Wiring diagrams Section: DOHC Diesel Engine

All sections

Replacing Oil Pressure Switch Opel Combo C

DOHC Diesel Engine 1 illustration

Remove

1. Open bonnet
2. Remove oil pressure switch (1) • Disconnect wiring harness plug

Replacing Oil Pressure Switch

Install

3. Install oil pressure switch • Tighten oil pressure switch 20.6 Nm • Connect wiring harness plug

Note. Coat thread with silicone sealing compound

4. Check engine oil level, if necessary correct.
5. Close bonnet
6. Program volatile memory