Home/Opel/Combo/Opel Combo C (2002-2011)/Repair manual/DOHC Diesel Engine/Remove and Install Torsional Vibration Damper

Contents

Wiring diagrams Section: DOHC Diesel Engine

All sections

Remove and Install Torsional Vibration Damper Opel Combo C

DOHC Diesel Engine 1 illustration

Remove

1. Remove ribbed V-belt
2. Remove torsional vibration damper (1) • Unscrew 4 bolts

Note. Counterhold at bolt (2)

Remove and Install Torsional Vibration Damper

Install

3. Install torsional vibration damper • Tighten 4 bolts 25 Nm

Note. Counterhold at torsional vibration damper flange bolt

4. Install ribbed V-belt