Home ReviewsRefund
Home/Opel/Combo/Opel Combo C (2002-2011)/Repair manual/DOHC Diesel Engine/Load Pressure Sensor, Edc Hdrc
Contents Wiring diagrams Section: DOHC Diesel Engine All sections

Load Pressure Sensor, Edc Hdrc Opel Combo C

DOHC Diesel Engine 2 illustrations ~141 words

Objective:

Checking Operation of the load pressure sensor.

Measurement:

Plot of voltage at the signal output of the load pressure sensor.

Preparation:

Switch off the engine and ignition. Engine oil temperature greater than 80°C .

Connections:

INPUT ACOM/TRIGGERINPUT B
Connect the red measurement lead to pin B (2), of the plug connector to the load pressure sensor. Connect the black ground lead to ground.

Procedure Tech 31:

  1. 1. Download Reference curve.
  2. 2. Start the engine and allow it to idle.
  3. 3. Depress the accelerator pedal quickly down to the limit stop and immediately release it again. The measurement should not take longer than half a second.

Reference Curve:

Procedure Tech 32:

  1. 1. Download Setup file (the Tech 32 uses only Setup files, no reference curves).
  2. 2. Start the engine and allow it to idle.
  3. 3. Depress the accelerator pedal quickly down to the limit stop and immediately release it again. The measurement should not take longer than half a second.

Setup File:

Reference Curve:

More articles — Engine and Engine Aggregates