Replace Lambda Sensor for Catalytic Converter Control (Z 16 XE, with Air Conditioning, Rhd) Opel Meriva A

1. 1. Open bonnet
2. 2. Raise vehicle
3. 3. Remove lambda sensor, catalytic converter control (3) • Detach wiring harness plug (2). • Use KM-6129 (1)

Note. Unscrew carefully.

4. 4. Install lambda sensor, catalytic converter control • Tighten lambda sensor for catalytic converter control – Use KM-6129 – Tightening torque 30 Nm • Connect wiring harness plug.

Note. Apply special grease (black) to thread

5. 5. Lower vehicle
6. 6. Close bonnet