Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/DOHC Diesel Engine/Replace Toothed Belt Drivewheel

Contents

Wiring diagrams Section: DOHC Diesel Engine

All sections

Replace Toothed Belt Drivewheel Opel Corsa D

DOHC Diesel Engine 1 illustration

Remove

1. Remove toothed belt
2. Remove toothed belt drivewheel (1) • Attach KM-662-C • Unscrew bolt – Counterhold KM-662-C • Use KM-161-B (2) • Remove plate

Replace Toothed Belt Drivewheel

Install

3. Install tooth belt drivewheel • Insert plate • Insert toothed belt drivewheel – Note spring washer • Counterhold KM-662-C • Tighten bolt 196 Nm
4. Install toothed belt