Home ReviewsRefund
Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/DOHC Diesel Engine/Replace Crankshaft Seal Ring (Rear)
Contents Wiring diagrams Section: DOHC Diesel Engine All sections

Replace Crankshaft Seal Ring (Rear) Opel Corsa D

DOHC Diesel Engine 2 illustrations

Remove

  1. 1. Remove flywheel
  2. 2. Remove rear crankshaft seal ring • Prise out seal ring (1) with suitable tool

Note. Do not damage sealing surfaces

Install

  1. 3. Install rear crankshaft seal ring • Position KM-658-2 on crankshaft journal • Slide seal ring onto KM-658-2 • Drive in flush using KM-658-1 (1)
  1. 4. Fit flywheel

More articles — Engine and Engine Aggregates