Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/DOHC Diesel Engine/Replace Cylinder Block Ventilation Flange

Contents

Wiring diagrams Section: DOHC Diesel Engine

All sections

Replace Cylinder Block Ventilation Flange Opel Corsa D

DOHC Diesel Engine 1 illustration

Remove

1. Remove starter
2. Remove flange of the cylinder block ventilation (1) • Detach vent hose (2) – Release clamp • Unscrew 2x bolts (3) • Remove gasket (4)

Replace Cylinder Block Ventilation Flange

Install

3. Clean sealing surface on cylinder block flange
4. Install flange of the cylinder block ventilation • Replace gasket • Attach vent hose – Fasten clamp • Tighten 2x bolt 9 Nm
5. Install starter