Home/Opel/Calibra/Opel Calibra I (1990-1997)/Repair manual/Fuel Injection Systems/Table 2 - Trouble Code Table: Trouble Code 72
Contents Section: Fuel Injection Systems All sections

Table 2 - Trouble Code Table: Trouble Code 72 Opel Calibra I

TroubleInformation SensorRemedy inTrouble Code Storage when ...
CodeCause of FaultF0:DATA LIST
Test Step
72SWITCH FULL08· Full load contact is closed
POSITION VOLTAGE· Load signal < 1.8 ms
LOW· Idle contact is closed
· All 3 conditions must occur at the same time.
If the load signal is < 4.5 ms, the control unit
receives the information:
throttle valve switch full load contact is opened
If the load signal is > 4.5 ms, the control unit
receives the information:
throttle valve switch full load contact is closed