Motronic M 2.8 F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |
|---|---|
| Trouble Code Storage when ... | |
| Remarks | |
| 14 | COOLANT TEMP. |
VOLTAGE LOW
| 06 | · Engine temperature higher than |
C 20 XE: 146 °C/293 °F
C 25 XE: 140 °C/282 °F
(short circuit to ground)
Replacement value:
If the intake air temperature is higher than 0.4 °C/32.72 °F, the control unit takes a replacement value of
C 20 XE: 51 °C/124 °F
C 25 XE: 80 °C/176 °F
If the intake air temperature is lower than 0.4 °C/32.72 °F, the control unit takes the intake air temperature as replacement value for 3 min after engine start and then the replacement value of
C 20 XE: 51 °C/124 °F
C 25 XE: 80 °C/176 °F
again.
The learn functions for oxygen sensor control, idle air control and knock control are blocked and the last valid values are used for calculation.