Motronic M 2.8 F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | ||
|---|---|---|
| Trouble Code Storage when ... | ||
| Remarks | ||
| 19 | INCORRECT RPM | |
| SIGNAL | 29, 30 | · Since ignition ON, there was at least one start with correct sychronization |
· C 20 XE: Engine speed greater than 920 rpm
C 25 XE: Engine speed greater than 520 rpm
· Incorrect engine speed signal recognized
(loose contact, tooth missing, gap incorrectly positioned)
Replacement value:
| No replacement value. Current values are used for mixture and requirement adaptation and neutral values are used for the idle air control and characteristic curve adaptation. |