Motronic M 2.8 F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | ||
|---|---|---|
| Trouble Code Storage when ... | ||
| Remarks | ||
| 17 | KNOCK SIGNAL | |
| CIRCUIT 2 | 08 | C 25 XE only |
· Engine speed higher than 1400 rpm
· Control unit reference voltage for knock sensor lower than 20 mV
(value varies depending on engine speed)
· Knock sensor voltage is evaluated and produces an implausible value.
Replacement value:
See trouble code 16.