Tabel 2, Trouble Codes
Trouble
| Code | Information Sensor | Remedy in | |
|---|---|---|---|
| F0:DATA LIST | |||
| Cause of Fault | No. | Trouble Code Storage when ... | |
| Remarks | |||
| 38 | O2 SENSOR | 36, 37, 38, 39, | · Oxygen sensor voltage less than 90 mV for longer |
| CIRCUIT | 40 | than 2.5 s | |
| VOLTAGE LOW | (short circuit to ground) | ||
| The trouble code is stored if | |||
| (conditions must be fulfilled consecutively): | |||
| 1.) Coolant temperature higher than 70 °C/158 °F | |||
| 2.) Condition 1.) fulfilled for 3 min | |||
| 3.) Load signal greater than 1.5 ms | |||
| 4.) After conditions 1.) to 3.) are fulfilled, waiting | |||
| period of 5 s elapsed | |||
| 5.) Trouble code 73 or 74 not recognized | |||
| Replacement value: | |||
| The control unit takes a replacement value of | |||
| 450 mV. | |||
| The oxygen sensor control is switched off. |