F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 16 | TORQUE CONTROL | Vehicles with MT or |
vehicles with AT
at constant speed
| AT shifts |
INACTIVE 5 V
| ACTIVE 0 V | 75 | 51, 19 |
Note:
In vehicles with AT, the engine torque is reduced on shifting via the ignition advance.
Before disconnecting the AT control unit, ensure that the AT trouble codes have been read out and noted.
Notes on Trouble-shooting:
| Nominal Value: | Cause of Fault: |
Vehicles with AT:
· Ignition OFF
· Disconnect AT control unit K 85 and Motronic control unit K 61 from wiring harness
· Using multimeter, check from AT control unit plug K 85 / Ter. 13 to
| Motronic control unit K 61 / Ter. 51 for continuity | ||
|---|---|---|
| approx 0 W | · Short circuit or lead interruption from AT |
control unit K 85 / Ter. 13
to Motronic control unit K 61 / Ter. 51
· AT control unit K 85 defective
· Motronic control unit K 61 defective