Remove
- 1. Open bonnet
- 2. Remove battery support.
- 3. Install engine hoist
- 4. Suspend engine • Unclip wiring harness plug (2) • Unclip wiring harness (1) • Position the chain case above the engine transport tab • Suspend hook (3) in engine transport tab (4) • Tension the chain by rotating the hex of the chain case
- 5. Remove left engine damping block • Unscrew 2x bolts (1) • Unscrew 2x bolts (2)
Install
- 6. Install left engine damping block • Tighten 2 bolts (2) – Tightening torque 80 Nm . • Tighten 2x bolt (1) – Tightening torque 80 Nm + 45°
Note. Use new bolts.
- 7. Detach engine hoist
- 8. Install battery holder
- 9. Program volatile memories
- 10. Close bonnet