| No. | Designation |
|---|---|
| 1 | Vacuum line intake manifold to fuel pressure regulator |
| 2 | Vacuum line intake manifold to solenoid valve vacuum control and vacuum reservoir |
| 3 | Vacuum line vacuum reservoir to solenoid valve vacuum control |
| 4 | Vacuum line solenoid valve vacuum control to recirculation valve |
| 5 | Vacuum line solenoid valve - turbo control unit to charge air pipe |
| 6 | Vacuum line solenoid valve - turbo control unit to wastegate unit |
| 7 | Vacuum line solenoid valve - turbo control unit to turbo air intake pipe |
Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/DOHC Petrol Engine/Illustration Vacuum Routing Engine Compartment
Contents
Wiring diagrams Section: DOHC Petrol Engine- How to Check and Measure the Cylinder Head and Attaching Parts (Survey)
- How to Check the Cylinder Head Height
- How to Check for Plane Surface the Cylinder Head
- How to Measure the Valve
- How to Check the Inner Diameter of Valve Guide
- Z 16 LEL Turbo Petrol Engine
- Valve Stem Play, Determine
- How to Check the Installation Height of Valves
- How to Check the Installation Height of Valve Guide
- Z 16 LER Petrol Engine
- Torque and Output Curve of the Z 16 LER Petrol Engine
- How to Overhaul the Cylinder Head
- Cylinder Head, Attach to Assembly Tool Set KM-6215
- Cylinder Head, Disassemble
- How to Remove the Valves
- Valve Seat, Cut (In Cylinder Head)
- Valve Guide, Ream
- Valve, Grind
- Valve, Grind In
- How to Replace the Valve Stem Seals
- Adjustment Data for Corsa-D A 10 XEP (1.0 Twinport Ecotec) 48 kW
- How to Assemble the Cylinder Head
- Adjustment Data for Corsa-D A 12 XEL (1.2 Twinport Ecoflex) 51 kW
- Cylinder Head Machining Special Tools
- Survey of All Vehicle Types
- Adjustment Data for Corsa-D A 12 XER (1.2 Twinport Ecoflex) 63 kW
- Oil Filter
- Adjustment Data for Corsa-D Z 12 XEP Lpg (1.2 Lpg Ecoflex) 59 kW
- Adjustment Data for Corsa-D A 14 XEL (1.4 Twinport Ecoflex) 64 kW
- Measuring Oil Consumption
- Adjustment Data for Corsa-D Z 14 XEP Lpg (1.4 Lpg Ecoflex) 66 kW
- Adjustment Data for Corsa-D A 16 LER (1.6 Turbo Ecotec) 141 kW
- Adjustment Data for Corsa-D A 16 LEL (1.6 Turbo Ecotec) 110 kW
- Damage Diagnosis, Dual Mass Flywheel
- Specified Time Allowance
- How to Check the Compression
- Check Engine Pressure Loss
- How to Measure the Oil Temperature
- How to Check the Engine Oil Pressure
- Testing Ribbed V-Belt Tensioner
- How to Replace the Ribbed V-Belt (Without Air Conditioning)
- How to Replace the Ribbed V-Belt (With Air Conditioning)
- Replace Ribbed V-Belt Tensioner
- How to Remove and Install the Cylinder Head Cover
- Replace EGR Valve
- How to Remove and Install the Hydraulic Valve Lifter
- How to Replace the Twinport Vacuum Unit
- How to Replace the Seal Ring - Rear Crankshaft
- How to Remove and Install the All Pistons with Con-Rods
- How to Check for Plane Surface the Cylinder Block
- How to Remove and Install the Oil Pan
- How to Remove and Install the Oil Dipstick Guide Tube
- Engine Oil with Oil Filter Change
- How to Check for Leaks the Engine ((CO Content in Cooling System))
- How to Remove and Install the Right Engine Damping Block
- Replace Left Engine Damping Block
- How to Remove and Install the Spark Plugs
- How to Remove and Install the Guide Rail
- How to Remove and Install the Chain Tensioner
- How to Replace the Intake Manifold Gasket
- Replace Ignition Module
- How to Remove and Install the Flywheel
- How to Remove and Install the Drive Disc
- How to Remove and Install the Dynamic Oil Level Check
- How to Remove and Install the Oil Pressure Switch
- Replace Right-Hand Engine Damping Block
- How to Replace the Rear Reaction Member
- Replace Exhaust Camshaft Position Sensor
- Replace Intake Camshaft Position Sensor
- Replace Camshaft Adjuster Solenoid Valve (Intake and Exhaust Side)
- Illustration of Coolant Hoses
- Illustration of Air Ducting
- Engine Identification Code / Engine Number
- How to Replace the Seal Ring - Front Crankshaft
- Replace Fuel Rail
- Check Crankshaft Bearing Play (With Micrometer Gauge Internal Measuring Device)
- How to Check the Crankshaft End Play
- How to Check the Radial Run-Out of Crankshaft
- How to Remove and Install the Crankshaft
- How to Remove and Install the Crankshaft Gear
- Check Con-Rod Bearing Clearance (Use Micrometer and Internal Measuring Device)
- How to Remove and Install the Tension Rail
- How to Remove and Install the Timing Case
- How to Remove and Install the Timing Chain
- How to Check the Fuel Pressure
- Replace Air Cleaner Housing
- How to Replace the Resonator
- How to Replace the Exhaust Gas Recirculation Pipe
- Detaching and Attaching Components, Cylinder Head
- How to Replace the Con-Rod Bearing
- How to Check (With Plastigage) the Con-Rod Bearing Play
- Measure Axial Play
- How to Check (With Plastigage) the Crankshaft Bearing Play
- How to Replace the Piston Rings
- Replace Oil Pressure Regulating Valve
- Replace Oil Pressure Switch
- How to Remove and Install the Oil Filter Housing
- How to Check the Oil Pump
- Removing and Installing Oil Baffle Plate
- How to Remove and Install the Manual Transmission from Engine
- Replace Hot Film Mass Air Flow Sensor
- How to Remove and Install the Accelerator Pedal Module
- Special Service Tools
- Sealants, Lubricants and Locking Agents
- Specifications
- Checking and Adjustment Values
- Ribbed V-Belt
- Engine Timing
- Cooling System
- Oil Circuit
- Cylinder Head
- Crank Drive, Cylinder Block
- Engine Management
- Torque Guide Values
- Replace Timing Chain Drive Gear
- Replace Valve Springs
- Removing and Installing Roller Cam Followers
- Measure Radial Run-Out
- How to Remove from Engine and Install the Mta-Manual Transmission
- Ribbed V-Belt - Engine Timing
- Illustration Vacuum Routing Engine Compartment
- Illustration Engine Management System
- Replace Ribbed V-Belt
- Replace Front Toothed Belt Cover (Top)
- Replace Front Toothed Belt Cover (Lower)
- Replace Auxiliary Drive
- Replace Toothed Belt
- Replace Toothed Belt Guide Roller
- Replace Toothed Belt Drivewheel
- Replace Toothed Belt Tensioner
- How to Remove and Install the Cylinder Head
- How to Replace the Seal Ring - Camshaft
- Replace Intake Manifold - Petrol Engine
- Remove and Install Exhaust Manifold with Turbocharger
- Removing and Installing Both Camshafts
- Replace Engine Vent Pipe
- Removing and Installing Cup Tappet
- Replace Camshaft Sprockets
- How to Remove and Install the Piston with Con-Rod
- Replace Piston
- Check Con-Rod Bearing Clearance (With Plastigage)
- How to Check the Crankshaft Out-Of-Round
- Check Crankshaft Bearing Clearance (With Micrometer Gauge Internal Measuring Device)
- Check Crankshaft Bearing Clearance (With Plastigage)
- Replace Engine Oil Level Sensor
- Replace Turbocharger Oil Feed Line
- Replace Turbocharger Oil Return Line
- Cooling System, Charge and Bleed
- Replace Heat Exchanger
- Repair Lower Radiator Mounting Pin
- Repair Intercooler Mount
- Replace Engine Damping Blocks
- How to Remove and Install the Engine
- Remove and Install Manual Transmission on Engine (Engine Out)
- Checking and Adjustment Values - Dohc-I
- Toothed Belt
- Coolant Circuit
- Toothed Belt Diagnosis - Possible Causes and Remedys
- Engine Management System Illustration (Intake Side)
- Engine Management System Illustration (View of Engine Compartment)
- How to Remove and Install the Coolant Pump Drive Gear
- Spark Plug Damages - Possible Causes and Failure Modes
- Engine Z10/12/14XEP - Loss of Oil Between Oil Filter Modul and Engine Block
- How to Remove and Install the Drive Disk
- Replacing the Air Cleaner Housing
- How to Replace the Timing Case Seal Ring
- Replace All Valve Stem Seals (Cylinder Head Installed)
- How to Remove and Install the Attaching Parts - Cylinder Head
- How to Remove and Install the Oil Intake Pipe
- How to Remove from Engine and Install the Manual Transmission
- Oil Circulation
- Crankshaft Drive, Cylinder Block
- Illustration of Air Ducts
- How to Remove and Install the Crankshaft Wheel
- How to Replace the Seal Ring - Crankshaft (Front)
- Check Con-Rod Bearing Clearance (With Micrometer Gauge and Internal Measuring Device)
- Engine A/Z10/12/14XEP/L - Crankcase Ventilation Hoses Cracked
- How to Check the Oil Pressure
- How to Replace the Ribbed V-Belt, Tensioner
- Replacing Oil Dipstick Guide Tube
- Attach and Detach Engine to Engine Overhaul Stand
- Attach and Detach Automatic Transmission with Torque Converter
- Removing and Installing Air Cleaner Housing
- How to Check the Timing
- Replace Camshaft Sensor
- How to Remove and Install the Engine Control Unit
- How to Install and Remove the Accelerator Pedal
- ABS 8
- ABS 8/ESP
- Adhesive Foiles
- Air Conditioning
- Airbag
- Anti-Theft Warning System-M
- Automatic Transmission Front Wheel Drive
- Battery
- Board Computer
- Body Equipment
- Brake Hydraulics, Brake Lines
- Brakes
- Car Level Control
- Clutch
- Clutch and Transmission
- Communication / Navigation
- Connector pinouts
- Cooling System
- Corrosion Protection
- DOHC Diesel Engine
- DOHC Petrol Engine
- Ecc Electronic Climate Control
- Electrical Equipment and Instruments
- Electrical Window Winders
- Electronic Module
- Engine and Engine Aggregates
- Engine Electrics
- Eps Electrical Power Steering
- Exhaust System
- Fittings, Hinges, Locks
- Frame
- Front End
- Front Wheel Brake
- Front Wheel Suspension
- Front Wheel Suspension, Wheels and Tyres
- Fuel and Exhaust System
- Fuel Injection Systems
- Fuel System
- Fuse Box
- General Vehicle Information
- Glass, Window Guides, Window Winders
- Glassfibre Parts (Bonded)
- Graphic Info Display
- Headlamps, Lamps and Horn
- Heating, Ventilation
- Heating, Ventilation, Air Conditioning (HVAC)
- Immobiliser
- Info Display Ccrt 700
- Instruments, Telltales
- Lpg
- Maintenance, Body and Chassis Sheet Metal Parts, Frame
- Manual Transmission Front Wheel Drive
- Mid (Multi Info Display)
- Other Accessories
- Outside Rear View Mirror
- Paint
- Painting Repair Operations
- Painting Repair System
- Parkpilot
- Radio
- Rear Axle and Rear Wheel Suspension
- Rear Axle Front Wheel Drive
- Rear Wheel Brake
- Seats, Upholstery, Inner Trim Panels
- Sensors
- Service Brake, Parking Brake
- Servo Motors
- Sheet Metal Parts (Bolted)
- Sheet Metal Parts (Cement and Seal)
- Sheet Metal Parts (Welded)
- Sliding Roof
- Special Installations
- Steering Gear
- Steering Intermediate Shaft
- Steering Linkage
- Steering Wheel - Steering Column
- Stopp/start System
- Switches
- Switches, Control Unit, Relays, Ignition Lock
- TID (Triple Info Display)
- Trailer Hitch
- Trim Panels, Radiator Grille, Spoiler
- Trim Strips, Lettering, Coverings
- Turbo-Charging
- Wheels and Tyres
- Windscreen Wash/wipe System, Heated Screen
- Wiring Harnesses