Home/Opel/Corsa/Opel Corsa D (2007-2011)/Repair manual/DOHC Petrol Engine/Replace Ignition Module

Contents

Wiring diagrams Section: DOHC Petrol Engine

All sections

Replace Ignition Module Opel Corsa D

DOHC Petrol Engine 1 illustration

Remove

1. Open bonnet
2. Remove ignition module • - Remove cover (1) • Disconnect wiring harness connector (3) • Unscrew 2x bolts (5) • Carefully pull out ignition module (4) with KM-6009 (2)

Replace Ignition Module

Install

3. Remove ignition module • Carefully attach ignition module with KM-6009 and attach to cylinder head • Tighten 2x bolts – Tightening torque 8 Nm . • Fix wiring harness plug • Attach cover
4. Close bonnet