Special Service Tools
KM - 226 - A Adapter
| For measuring timing of fuel injection pump. | |||
|---|---|---|---|
| .P. U9637.tif | 9 | 7,5 | tiff;; |
KM - 235 - D Installer
| To install crankshaft needle bearing. | |||
|---|---|---|---|
| .P. B7868.tif | 9 | 7,5 | tiff;; |
KM - 328 - B Remover
| To remove crankshaft needle bearing. | |||
|---|---|---|---|
| .P. A7927.tif | 9 | 7,5 | tiff;; |
KM - 412 Engine Overhaul Stand
| To hold removed engine - use with suitable adapter. | |||
|---|---|---|---|
| .P. D1625.tif | 9 | 7,5 | tiff;; |
MKM - 667 Pressure and Vacuum Pump
| To check charge pressure and vacuum switching valves. | |||
|---|---|---|---|
| .P. C8917.tif | 9 | 7,5 | tiff;; |
KM - 8075 Puller
| To remove crankshaft damper pulley and crankshaft gear. | |||
|---|---|---|---|
| .P. U9630.tif | 9 | 7,5 | tiff;; |
KM - 8076 Puller / Holder
| To remove and hold gear to fuel injection pump. | |||
|---|---|---|---|
| .P. C9633.tif | 9 | 7,5 | tiff;; |
KM - 8077 Wrench
| To remove and install cylinder head bolts. | |||
|---|---|---|---|
| .P. U9635.tif | 9 | 7,5 | tiff;; |
KM - 8078 Compressor
| To compress the ribbed V - belt tensioner. | |||
|---|---|---|---|
| .P. U9636.tif | 9 | 7,5 | tiff;; |
KM - 8079 Wrench
| To remove and install fuel injectors. | |||
|---|---|---|---|
| .P. U9638.tif | 9 | 7,5 | tiff;; |
KM - 8080 Locking Device
| To lock flywheel. | |||
|---|---|---|---|
| .P. U9639.tif | 9 | 7,5 | tiff;; |
KM - 8081 Installer
| To install oil seal in timing cover. | |||
|---|---|---|---|
| .P. U9640.tif | 9 | 7,5 | tiff;; |
KM - 8082 Locking Device
| To hold crankshaft damper pulley and water pump pulley. | |||
|---|---|---|---|
| .P. U9642.tif | 9 | 7,5 | tiff;; |
KM - 8083 Adapter
| To measure cylinder pressure. | |||
|---|---|---|---|
| .P. U9643.tif | 9 | 7,5 | tiff;; |
KM - 8084 Puller
| To remove cylinder liners. | |||
|---|---|---|---|
| .P. U9631.tif | 9 | 7,5 | tiff;; |
KM - 8085 Remover / Installer
| To remove and install front and rear crankshaft main bearings, and crankshaft bearings. | |||
|---|---|---|---|
| .P. U9632.tif | 9 | 7,5 | tiff;; |
KM - 8086 Remover / Installer
| To support crankshaft during removal and installation. | |||
|---|---|---|---|
| .P. D9634.tif | 9 | 7,5 | tiff;; |
KM - 8087 Retainers
| To hold cylinder liners in position. | |||
|---|---|---|---|
| .P. U9641.tif | 9 | 7,5 | tiff;; |