Contents Section: Diesel Engine All sections

How to Remove and Install the Engine Opel Frontera A

Engine, Remove and Install

.D. ICON01.tif0,750,75tiff;; Remove, Disconnect

Ground cable from battery.

Bonnet.

Radiator - see corresponding operation.

All electrical cable connections, hoses and lies from engine.

Cables from injection pump.

Exhaust pipe from manifold.

Transmission - see corresponding operation in group K.
.P. C4298.tif97,5tiff;;
.D. ICON02.tif0,750,75tiff;; Install, Connect
Lifting eyes to front and rear of engine.
.P. C4299.tif97,5tiff;;
.D. ICON01.tif0,750,75tiff;; Remove, Disconnect
Nuts from left and right engine damping block to engine bracket.
.P. U0511.tif97,5tiff;;
.D. ICON01.tif0,750,75tiff;; Remove, Disconnect
Engine from vehicle. Protect intercooler and oil cooler from fan by use of a wooden board.
.D. ICON02.tif0,750,75tiff;; Install, Connect

Engine to vehicle.

Transmission - see corresponding operation in group K.

.D. ICON09.tif0,750,75tiff;; Tighten (Torque)
Engine damper block to engine bracket - 85 Nm / 63 lbf ft.
.D. ICON02.tif0,750,75tiff;; Install, Connect

Exhaust pipe to manifold.

Radiator - see corresponding operation.

All electrical cable connections, hoses and lines to engine.

Cables to injection pump.

Bonnet.

Ground cable to battery.
.P. C4298.tif97,5tiff;;
.D. ICON06.tif0,750,75tiff;; Inspect

Engine oil level.

Fill up cooling system and bleed - see corresponding operation.