Compression, Check
| .D. ICON11.tif | 0,75 | 0,75 | tiff;; Important! |
Engine to be at operating temperature.
Use a compression tester with measuring range 1000 to 4000 kPa.
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
|---|---|---|---|
| Injectors from cylinder heads - see corresponding operation. | |||
| .P. U9687.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
Adapter KM - 8083 to relevant injector threaded hole and to compression tester.
| .D. ICON07.tif | 0,75 | 0,75 | tiff;; Measure |
|---|---|---|---|
| Check compression for each cylinder at starter speed for approx. 4 seconds. | |||
| .P. U9101.tif | 9 | 7,5 | tiff;; |
| .D. ICON01.tif | 0,75 | 0,75 | tiff;; Remove, Disconnect |
Adapter from injector threaded hole.
| Compression tester. | |||
|---|---|---|---|
| .P. U9101.tif | 9 | 7,5 | tiff;; |
| .D. ICON02.tif | 0,75 | 0,75 | tiff;; Install, Connect |
| Injectors into cylinder head - see corresponding operation. | |||
| .P. U9687.tif | 9 | 7,5 | tiff;; |