Camshaft
| Bearing No. | Journal diameter | |
|---|---|---|
| (mm) | Diameter in housing | |
| (mm) | ||
| Standard size 0.1mm Undersize | Standard size 0.1mm Undersize | |
| Guide bearing | 33.975 | |
| 33.950 | 33.875 | |
| 33.850 | 34.025 | |
| 34.000 | 33.925 | |
| 33.900 | ||
| 2 | 44.700 | |
| 44.685 | 44.600 | |
| 44.585 | 44.775 | |
| 44.750 | 44.675 | |
| 44.650 | ||
| 3 | 44.950 | |
| 44.935 | 44.850 | |
| 44.835 | 45.025 | |
| 45.000 | 44.925 | |
| 44.900 | ||
| 4 | 45.200 | |
| 45.185 | 45.100 | |
| 45.085 | 45.275 | |
| 45.250 | 45.175 | |
| 45.150 | ||
| 5 | 45.450 | |
| 45.435 | 45.350 | |
| 45.335 | 45.525 | |
| 45.500 | 45.425 | |
| 45.400 |
The P & A Department supplies camshaft bearing supports with ready - made bearing shells in standard size and undersize of 0.1 mm.
| .D. ICON11.tif | 0,75 | 0,75 | tiff;; Important! |
Note section 'Camshaft Bearing Supports, Replace' in model - independent Service Instructions.