Belt Tensioner
A tensioner assembly is installed on the cylinder block to hold the ribbed V - belt under constant tension.
1 Adjuster screw
2 Pulley, tensioner
3 Pivot point
4 Tensioner
5 Bracket, tensioner
| The belt tension is set by the adjustment screw, which moves the tensioner pulley along the bracket. The tensioner applies a force to the bracket to push the pulley against the belt. | |||
|---|---|---|---|
| .P. U9442.tif | 9 | 7,5 | tiff;; |
· Service
The tensioner is compressed using Compressor KM - 8078.