Home ReviewsRefund
Home/Opel/Agila/Opel Agila B (2008-2011)/Repair manual/Engine Control and Fuel System - D13A/Glow Plug Control Module Replacement
Contents Wiring diagrams Section: Engine Control and Fuel System - D13A All sections

Glow Plug Control Module Replacement Opel Agila B

Engine Control and Fuel System - D13A ~234 words

Remove

  1. 1. Disconnect harness connector (3) from mass air flow (MAF) meter
  2. 2. Release cover (2) from air cleaner assembly • Release 4x screw, then move to one side
  3. 3. Remove air cleaner element from air cleaner assembly
  4. 4. Release outlet hose (1) from air cleaner assembly • Release clip
  5. 5. Release harness for MAF meter from air cleaner assembly • Release clip using suitable tool
  6. 6. Remove air cleaner assembly from battery tray and upper front panel • Remove 2x bolt (4) • Pull up to release 2x locator from battery tray
  1. 7. Remove glow plug control unit (1) from battery tray • Slide off • Disconnect harness connector

Install

  1. 8. Install new glow plug control unit (1) to battery tray • Connect harness connector • Slide on
  1. 9. Install air cleaner assembly to battery tray and upper front panel • Push down to secure 2x locator to battery tray • Install 2x bolt (4)
  2. 10. Secure harness for MAF meter to air cleaner assembly • Secure clip
  3. 11. Secure outlet hose (1) to coolant expansion tank to air cleaner assembly • Secure clip
  4. 12. Install air cleaner element to air cleaner assembly

Note. Before installing the air cleaner element, remove all debris from the air cleaner assembly.

  1. 13. Secure cover (2) to air cleaner assembly • Secure 4x screw
  2. 14. Connect harness connector (3) to MAF meter

More articles — Engine