Home ReviewsRefund
Home/Opel/Agila/Opel Agila B (2008-2011)/Repair manual/Engine Control and Fuel System - D13A/Diesel Particulate Filter Pressure Sensor Replacement
Contents Wiring diagrams Section: Engine Control and Fuel System - D13A All sections

Diesel Particulate Filter Pressure Sensor Replacement Opel Agila B

Engine Control and Fuel System - D13A

Remove

  1. 1. Disconnect harness connector (1) from DPF differential pressure sensor • Release harness connector lock
  2. 2. Release hose (2) from DPF sensor • Release clip • Install new blanking plug
  3. 3. Remove DPF sensor from fuel pipe assembly • Remove bolt

Install

  1. 4. Install new DPF sensor to fuel pipe assembly • Install bolt
  2. 5. Secure hose (2) to DPF sensor • Remove blanking plug • Secure clip
  3. 6. Connect harness connector (1) to DPF sensor • Secure harness connector lock

More articles — Engine