Charge Pressure Sensor Replacement Opel Agila B

Remove

1. 1. Disconnect harness connector (2) from charge pressure sensor
2. 2. Remove charge pressure sensor from intake manifold • Remove screw (1)
3. 3. Remove O ring from charge pressure sensor • Prise off

Install

4. 4. Install new O ring to new charge pressure sensor • Apply suitable lubricant to O ring, then slide on
5. 5. Install charge pressure sensor to intake manifold • Install screw (1) 1.0 Nm
6. 6. Connect harness connector (2) to charge pressure sensor