Crankshaft Position Sensor Replacement Opel Agila B

Remove

1. 1. Raise vehicle
2. 2. Disconnect harness connector from crankshaft position sensor (1) • Release lock, then move harness to one side
3. 3. Remove crankshaft position sensor from cylinder block • Remove bolt (2)

Install

4. 4. Install new crankshaft position sensor (1) to cylinder block • Install new O ring – Apply suitable lubricant to O ring • Install bolt (2) 8 Nm
5. 5. Connect harness connector to crankshaft position sensor • Secure lock

6. 6. Lower vehicle