Home ReviewsRefund
Home/Opel/Agila/Opel Agila B (2008-2011)/Repair manual/Engine Control and Fuel System - D13A/Diesel Particulate Filter Temperature Sensor Replacement
Contents Wiring diagrams Section: Engine Control and Fuel System - D13A All sections

Diesel Particulate Filter Temperature Sensor Replacement Opel Agila B

Engine Control and Fuel System - D13A ~104 words

Remove

  1. 1. Disconnect temperature sensor from body harness • Release temperature sensor from bracket (2) – Release clip, then slide off • Disconnect harness connector (1) – Release lock
  2. 2. Remove temperature sensor (4) from front exhaust pipe (3) • Release union • Install 2x new blanking plug

Install

  1. 3. Install new temperature sensor (4) to front exhaust pipe (3) • Remove 2x blanking plug • Secure union 45 Nm
  2. 4. Connect temperature sensor to body harness • Connect harness connector (1) – Secure lock • Secure temperature sensor to bracket (2) – Slide on and secure clip

More articles — Engine