Camshaft Position Sensor Replacement Opel Agila B

Remove

1. 1. Remove engine cover from engine • Remove 4x bolt
2. 2. Move camshaft cover insulation to one side
3. 3. Remove camshaft position sensor from camshaft housing • Disconnect harness connector • Remove bolt (1)

Install

4. 4. Install new camshaft position sensor to camshaft housing • Install new O ring – Apply suitable lubricant to O ring • Install bolt (1) 8 Nm • Connect harness connector

5. 5. Position camshaft cover insulation
6. 6. Install engine cover to engine • Install 4x bolt 8 Nm