Lubricants and Operating Materials, Overview
The table shows an overview of the Service Plan lubrication and operating material operations. Further details such as capacities and special features is included in the text or can be found elsewhere in Technical Data.
| Op. no. | Application | Description |
|---|
| 4.13 | Coolant anti�freeze | Material spec. B 040 1065 NAO spec. GM 6277MT |
| 4.4 4.26 | Brake and clutch fluid | FMVSS 571.116 DOT 4, SAE J 1703 |
| 4.2 | Wash/wipe system | Cleaning agent/anti�freeze |
| 4.8 | Power steering fluid | Special fluid "Dexron �III..." |
| 4.30 | Hinges and bonnet catch | Anti�friction grease |
| 4.14 | Automatic transmission | Special fluid "Dexron �III..." |
| 4.1 | Engine oil | Y22DTH,4JA1TC ACEA B3 6VD1-W ACEA A3 Y22SE ACEA A2 or higher |
| 4.20 | Front hub bearings | Anti�friction bearing grease |
| 4.23 | Shift�on�the�fly | Normal temperatures SAE 90 or 80W�90 |
| 4.13 | Propeller shafts and sliding sleeves | Grease GM 4750�M |
| 4.24 | Front and rear axle oil | |
| - Frontera�B | Front axle - SAE SH 75 W 90 API GL5 Rear axle - SAE SH 90 API GL5 |
| | |
| � Campo/Brava | Front axle - SAE 80W - 90 API GL5 Rear axle - SAE 80W - 90 API GL5 |
| 4.25 | Manual transmission and transfer case | Normal temperatures Engine oil API�SF, SG, SAE 5W�30 |
Drive Belts
Drive belts for Frontera�B 3.2 V6 (6VD1�W) and Frontera�B 2.2�16V (Y22SE) are not manually adjustable.
Check belt tension using Tension Gauge KM�128�A.
| Engine | Drive Belt | Tension [N] |
|---|
| Y22DTH | New | 450 |
| Used | 250�300 |
Check belt depression with a thumb pressure of approx. 98 N.
| Engine | Drive Belt | Depression [mm] |
|---|
| 4JA1TC | Alternator | 8-12 |
| Power steering/air con. | 13-16 |
Tightening Torque for Wheel Attachment
| Vehicle | Tightening torque [Nm] |
|---|
| Frontera�B | 118 |
| Campo/Brava | 88 |
Tyre Pressures
| Model | Designation | Pressure [kPa/bar/psi] |
|---|
| | Front | Rear |
| Frontera�B | 235/75 R15 | 200/2.0/29 | 200/2.0/29 |
| 245/70 R16 | 180/1.8/26 | 180/1.8/26 |
| | | |
| Campo/Brava | 195 R14 C8 | 250/2.5/36 | 450/4.5/64 |
| 205/80 R16 | 200/2.0/28 | 270/2.7/38 |
For more information, consult the vehicle Owner's Manual or the "Wheels and Tyres" brochure KTA�1690.
Engine Oil Quality
The engine oil quality must correspond to ACEA performance class. The chart shows the minimum grade oil acceptable. Higher quality can always be used.
| Engine | Specification | ACEA |
|---|
| Y22SE | Synthetic and semi�synthetic oil | A2 or higher |
| 6VD1-W | Synthetic and semi�synthetic oil | A3 |
| Y22DTH,4JA1TC | Synthetic and semi�synthetic oil | B3 |
Oils meeting several classifications are designed accordingly, e.g. ACEA�A3/B3
Engine Oil Viscosity
Engine oil viscosity to be selected depending on the ambient temperature.
Engine Oil Filling Quantities
| Model | Engine | Engine oil with filter change [l] | Min to Max [l] |
|---|
| Frontera�B | Y22DTH | 6.0 | 1.0 |
| Y22SE | 4.5 | 1.0 |
| 6VD1�W | 4.7 | 1.0 |
| | | |
| Campo/Brava | 4JA1TC | 6.5 | 1.0 |
Front Hub Bearings
| Model | Preload [N] |
|---|
| All 4x4 | 12�18 |
| Campo/Brava 4x2 | 8�10 |
Lubricant: Anti�friction Bearing Grease (see Parts Catalogue).
Parking Brake Travel
| Model | Travel [notches] |
|---|
| Frontera�B | 6�8 |
| |
| Campo/Brava: | |
| Floor mounted | 6�7 |
| Instrument panel mounted | 9�11 |
Propeller Shafts and Sliding Sleeves
| Flange bolts | Torque [Nm] |
|---|
| Frontera�B | 63 |
| Campo/Brava 167 mm diff. front axle | 32 |
| 194 mm diff. rear axle | 35 |
| MSG transmission | 35 |
| All others | 63 |
Front and Rear Axle Oil Quantity
| Differential type | Axle filling quantity [l] |
|---|
| Front | Rear |
| Frontera�B: | 1.5 | 1.8 |
| | |
| Campo/Brava: 167 mm | 1.0 | � |
| 194 mm | 1.5 | 1.8 |
| 220 mm | � | 1.5 |
Front and Rear Axle Oil Quality
| Quality | Temperature | Viscosity |
|---|
| API�GL5 | Normal temperatures | SAE 90 or 80W�90 |
| Consistently below 10 �C | SAE 80 or 80W�90 |
| Consistently above 10 �C | SAE 140 or 80W�90 |
Limited slip differential (rear axle): as above but with limited slip additives.
Manual Transmission and Transfer Case Oil
| Transmission | Quantity [l] | Quality and viscosity |
|---|
| MSG � without transfer case | 1.55 | Use engine oil |
| MUA � without transfer case | 2.95 | � see "Engine oil visosity" data |
| � with transfer case | 4.50 | |
| Transfer case on automatic | 1.45 | |
Valve Clearance
Adjusted with engine stationary and cold. Tolerance = � 0.05 mm.
| Engine | Exhaust [mm] | Inlet [mm] |
|---|
| 4JA1TC | 0.4 | 0.4 |
| 6VD1�W | 0.30 | 0.28 |
Y22SE and Y22DTH engines have automatic hydraulic adjustment.
Spark Plugs
| Engine | Gap [mm] | Torque [Nm] |
|---|
| Y22SE, 6VD1�W | 1.0�1.1 | 18 |
