Betrifft:
Time Allowances
Fahrzeuge:
Vectra - B, Omega - B
Befund:
The time allowances specifications for th operations listed overleaf have been changed and are valid as of 1st August 1997.
Unless otherwise specified, the time allowance specifications for additional operations remain valid and can be found in the current publications.
| Model Line | Op.- No. | Operation | Time Allow. | |
|---|---|---|---|---|
| Vectra- B | Oil Pump - Replace | |||
| TC: 01, 04, 06, 12, 15, 27, 40, 42, 61 | ||||
| J316300 | Petrol engine | 6.8 | X25XE | |
| Omega- B | J 794400 | Crankshaft Pulse Pick-up - Replace | .6 | X20SE |
| TC: 01, 86, 87 | .7 | X20XEV | ||
| Add: | ||||
| 002 | For vehicles with air conditioning | 1.0 | X20SE | |
| .4 | X20XEV | |||
| M 041000 | Steering Gear - Replace | 2.0 | X20SE | |
| TC: 12, 15, 30, 40, 42, 56 | 2.3 | X20XEV | ||
| 4.8 | X25XE | |||
| X30XE | ||||
| 2.2 | X25DT |
The specified time allowances do not include the time allowance for the vehicle set-up of .2 hrs.
The refunding of the vehicle set-up time of .2 hrs in warranty entries is performed by entering the authorisation code "T" and increasing the main operation time allowance by .2 hrs.
The authorisation code may be used once per work order. Further entries are only permitted if the work station and the work team are also changed at the same time.